Heating

For your residential and commercial heating, furnace installation, and furnace repair needs, there is no one better than the technicians at Kingdom Air. At Kindom Air we want to be able to raise your thermostat, without raising your budget.

As with our Air Conditioning units, Kingdom Air installs state-of-the-art heating systems that live up to expectations for efficiency, reliability, and temperature control. As a Factory Authorized Dealer, our team is held to the highest level of quality control, ensuring product knowledge, ongoing training, and technical expertise. We provide helpful recommendations, perform accurate load calculations, and protect your investment with conscientious installation.

Kingdom Air Assures Complete Satisfaction on new furnace installation.

We recognize the significance of your investment into home heating. Your system needs to handle your comfort for years to come. You want to be completely happy with your choice. At Kingdom Air, we strive to simplify the process and facilitate rewarding results. With so many sizes and styles available, the decision can be a challenge. The professionals from Kingdom Air will outline your options, explain advantages and disadvantages, and help you narrow it down to the perfect decision.

If you’re getting by with subpar comfort and an outdated furnace system, it’s the perfect time to consider an upgrade. These advanced systems deliver far more heating power for greater efficiency. You’ll enjoy the peace-of-mind of warranty coverage, and and wonderfully warm home all winter long. Contact the experienced team from Kingdom Air, and we’d be happy to help you browse the many exciting features. You’re sure to find something that suits your exact needs for budget, efficiency, and luxury.

Furnace Repair and Maintenance

As with any other device or equipment that runs around the clock, good maintenance and repairs are a key part of getting the most value for your energy dollar. Checking the system yourself periodically, and having it inspected regularly will help ensure it stays in peak operating condition.

At Kingdom Air, we provide both, offering one time repairs for normal wear and tear or emergencies, and by offering a year round maintenance service.

Read more about our furnace maintenance and repair services by clicking ‘Read More’ below.

"Our customers are the best, and that is why we strive to be the very best at everything we do."

Bob Graber

Co-owner of Kingdom Air

Furnace Technical Information

With heating systems, the efficiency of a furnace is determined by its AFUE (Annual Fuel Utilization Efficiency); a gas furnace’s efficiency in converting fuel to energy. The higher the AFUE, the more energy efficient the furnace is.

A gas furnace with an 80% AFUE rating means that 80 cents of every $1.00 of heating energy expense warms the home. A gas furnace with 95% AFUE rating means that 95 cents of every $1.00 of heating expense warms the home. AFUE furnaces are the most efficient.

What is a Furnace?

A household heating furnace is a permanent installation within a home that provides heat for the interior space. this is done using an intermediary fluid – often air or steam – moving through the system. However, a modern furnace would be running on natural gas, liquefied petroleum gas, oil, coal or wood. In cases where the electricity costs are low, there are some furnaces that could use electricity.

How a Gas Furnace Works

A gas furnace (referred to as a gas forced-air furnace system) is activated by the thermostat when it detects a drop in room temperature below the set level. The thermostat will send an electrical signal to a relay within the furnace to open a valve, move natural gas to the burners and turn the blower on. The burners are lit using a pilot light or ignition light inside the furnace creating heat within a metal chamber called the heat exchanger through which the air circulates. Once the air is heated in the heat exchanger, it is pushed through a hot-air plenum before going out through the ducts into the room. The gases created during combustion by the burners are moved out through a chimney in the roof. For highly efficient furnaces, however, these gases can be vented through the wall.

Types of Furnaces

There are three types of furnaces:

Single-stage furnace

These usually have a single operation stage, either on or off, hence the name ‘single-stage’. Due to this, the furnace is rather noisy and always runs at maximum speed pumping the hot air out. However, it is inexpensive to purchase and install due to the simple technology involved.

Two-stage furnace

This type has two operation stages i.e. full speed and reduced/half speed. This means that they can run at a lower speed depending on how much heating is required, thereby keeping the house at the desired temperature. They are also quieter since the air doesn’t move through at as high a velocity as it does in case of a single-stage furnace.

Modulating furnaces

These can constantly regulate the amount of heat being released along with the velocity of the air passing through. This allows you to save more on energy costs than you would with either of the other furnaces and gives you better control of the temperature inside the house.

Advantages of a furnace system

There are several advantages of having a furnace system. These include:

1: Multipurpose ducts

With furnace systems, the ductwork functions to deliver the heated air into the room. However, they can also bring in cool air during warmer seasons, so you can install an air conditioning system as well if you have a furnace.

2: Easy parts and repairs

Furnaces are common in most homes, so in case of repairs or replacement you can easily find spare parts.

3: Energy efficient

The fuel efficiency of a gas furnace is measured in Annual Fuel Utilization Efficiency (AFUE). Most of the gas furnaces available today have AFUE ratings of over 90% and electric furnaces have 100% AFUE ratings. This means that you will not only be saving on the cost of energy utilization but also caring for the environment.

4: Faster heat

Natural gas heats quickly, so if you have a furnace your home will be heated up rather quickly. This means you won’t have to turn on your heating system hours earlier to ensure that your home is at the right temperature before you walk in.

Furnace system troubleshooting

Usually, when the temperature of a furnace goes above the maximum required threshold, a thermostat will shut it down. If there is a problem with your furnace, it will keep being shut down before your house has reached the desired temperature. It also means that your furnace’s high limit temperature setting is too close to its normal operating temperature, so you should adjust it upwards.

Alternatively, the humidifier may be poorly installed on the furnace so the duct may be returning too much of the humidified air back into the furnace, thereby raising the temperature in the furnace. The solution is to reduce the size of the cross-feed tube or put in a baffle that reduces the amount of air that’s going back into the furnace.

Note: There are higher efficiency models than 95% and different motor/stages types. The different motor types also increase efficiency and can be communicating with the AC to improve efficiency even further.

Let us help you with your Heating & Furnace needs.

Call Kingdom Air today at (812)-486-3840 to schedule an appointment or service call.